Diameter variation of approximately
25% is achievable. Hose clamps are 1/2" wide except for
the miniatures (M suffix) which are 5/16ths wide. Screws are slotted hex unless
otherwise indicated. Suffix W indicates wing nut style screw.All Prices subject to change without notice. To contact us at Bon Aero, call us at (209) 754-5175, fax us at (209) 754-5177 or e-mail us at admin@davebean.com
CLAMPS
AN 737 Hose Clamps (QS 300), AN 741 Tube Clamp - Z Bolt, AN 742 Aluminum Tube Clamp, MS21919 "Adel" Cushion Clamp.
Hose clamps are 100% stainless steel. Dash numbers indicate the mean
diameter of clamped hose in 1/16ths of an inch.
Diameter variation of approximately
25% is achievable. Hose clamps are 1/2" wide except for
the miniatures (M suffix) which are 5/16ths wide. Screws are slotted hex unless
otherwise indicated. Suffix W indicates wing nut style screw.
AN 737
HOSE CLAMP (QS
300)
Return to Top
AN 737- 4M 0 to 49 0.88 50
and up 0.75
AN 737- 6 0 to 49 1.32 50 and up 1.20
AN 737- 6M 0 to 49 0.95
50 and up 0.88
AN 737- 8 0 to 49 1.32 50 and up 1.20
AN 737- 8M 0 to 49
0.87 50 and up 0.75
AN 737- 8W 0 to 49 2.25 50 and up 2.03
AN 737-10 0 to
49 1.34 50 and up 1.20
AN 737-10W 0 to 49 2.48 50 and up 2.23
AN 737-12 0
to 49 1.35 50 and up 1.20
AN 737-12W 0 to 19 2.62 20 and up 2.35
AN
737-16 0 to 49 1.36 50 and up 1.25
AN 737-16W 0 to 49 1.03 50 and up
0.93
AN 737-20 0 to 49 1.38 50 and up 1.20
AN 737-24 0 to 49 1.40 50 and
up 1.20
AN 737-28 0 to 49 1.79 50 and up 1.65
AN 737-32 0 to 49 1.64 50
and up 1.45
AN 737-36 1.70
AN 737-44 1.80
AN 737-48 2.12
AN 737-52
1.95
AN 737-72 2.26
AN 737-88 3.10
AN 741
TUBE CLAMP - Z
BOLT
Dash number designates tube diameter in 1/16ths of an inch, P
suffix indicates plated steel.
Return to Top
AN 741- 4
3.20
AN 741- 6 4.65
AN 741- 7 4.98
AN 741-T 8P 2.00
AN 741-T10P
2.10
AN 742
ALUMINUM
TUBE CLAMP
Dash number designates clamped tube in 1/16ths of an
inch.
Return to Top
AN 742-D
3 0 to 19 0.44 20 and up 0.40
AN 742-D 4 0 to 19 0.51 20 and up 0.46
AN
742-D 5 0 to 19 0.51 20 and up 0.46
AN 742-D 6 0 to 19 0.55 20 and up
0.49
AN 742-D 8 0 to 19 0.56 20 and up 0.51
AN 742-D10 0 to 19 0.59 20
and up 0.53
AN 742-D12 0 to 19 0.60 20 and up 0.54
AN 742-D14 0 to 19
0.65 20 and up 0.59
MS21919
"ADEL"
CUSHION CLAMP
Cushion Clamps (a.k.a. "Adel"
clamps). The dash number is the closed diameter of the clamp in multiples of
1/16ths of an inch. Alfa code before dash number indicates material.
DG =
Aluminum clamp with chloroprene rubber cushion (black with blue stripe) (with
wedge).
CH = Stainless clamp with high temperature silicone rubber cushion
(white)(with wedge).
Return to Top
MS21919WCH 9 0 to
99 3.18 100 and up 2.98
MS21919WCH10 0 to 99 1.38 100 and up
1.19
MS21919WCH12 0 to 99 1.28 100 and up 1.19
MS21919WDG 2 0 to 99 0.46
100 and up 0.41
MS21919WDG 3 0 to 99 0.59 100 and up 0.52
MS21919WDG 4 0
to 99 0.49 100 and up 0.44
MS21919WDG 5 0 to 99 0.49 100 and up
0.44
MS21919WDG 6 0 to 99 0.48 100 and up 0.42
MS21919WDG 7 0 to 99 0.54
100 and up 0.48
MS21919WDG 8 0 to 99 0.55 100 and up 0.50
MS21919WDG 9 0
to 99 0.56 100 and up 0.51
MS21919WDG10 0 to 99 0.60 100 and up
0.58
MS21919WDG11 0 to 99 0.64 100 and up 0.58
MS21919WDG12 0 to 99 0.65
100 and up 0.59
MS21919WDG13 0 to 19 1.15 20 and up 1.00
MS21919WDG14 0
to 19 1.16 20 and up 1.00
MS21919WDG15 0 to 19 0.64 20 and up
0.58
MS21919WDG16 0 to 19 1.19 20 and up 1.00
MS21919WDG17 0 to 19 0.90
20 and up 0.82
MS21919WDG18 0 to 19 0.98 20 and up 0.88
MS21919WDG20 0 to
19 1.65 20 and up 1.48
MS21919WDG21 0 to 19 1.34 20 and up
1.21
MS21919WDG22 0 to 19 1.48 20 and up 1.29
MS21919WDG23 0 to 19 1.50
20 and up 1.40
MS21919WDG24 0 to 19 1.50 20 and up 1.40
MS21919WDG25 0 to
19 1.59 20 and up 1.45
MS21919WDG26 0 to 19 1.59 20 and up
1.45
MS21919WDG28 0 to 19 1.78 20 and up 1.61
MS21919WDG32 0 to 19 1.82
50 and up 1.65
MS21919WDG35 0 to 19 2.00 20 and up 1.80
MS21919WDG36 0 to
19 2.05 20 and up 1.85
MS21919WDG40 0 to 19 2.10 20 and up
1.90
MS21919WDG56 0 to 99 4.75 100 and up 4.22
MS21919WDG66 0 to 19 4.20
20 and up 3.78