All Prices subject to change without notice. To contact us at Bon Aero, call us at (209) 754-5175, fax us at (209) 754-5177 or e-mail us at admin@davebean.com

GASKETS, SEAL WASHERS, O-RINGS

AN 900 Copper / Fiber Gasket, AN 901 Crush Washer, NAS 1523 Stat-O-Seal, AN 904 Two Piece Seal, AN 907 Conical Seal, AN 6290 / MS28788 O-Ring Port, AN 931 Grommet, Plastic Cap Plugs: NAS 814 Flare Cap, NAS 815 Flare or Port Plug, NAS 816 Tapered Cap Plug.

AN 900
COPPER/FIBER GASKET
Return to Top
AN 900- 6 0 to 49 0.70 50 and up 0.60
AN 900- 7 0 to 49 0.86 50 and up 0.75
AN 900- 8 0 to 49 0.88 50 and up 0.75
AN 900- 9 0 to 49 0.85 50 and up 0.80
AN 900-10 0 to 49 0.72 50 and up 0.65
AN 900-11 1.00
AN 900-12 0.80
AN 900-14 0.96
AN 900-16 0.85
AN 900-18 0.84
AN 900-20 1.16
AN 900-21 1.16
AN 900-22 1.20
AN 900-24 0.80
AN 900-28 0.75
AN 900-29 0.77
AN 900-37 0.88
AN 900-38 1.18

AN 901
CRUSH WASHER
Return to Top
A = Annealed aluminum
C= Annealed copper.
AN 901- 3A 0 to 24 0.44 25 and up 0.40
AN 901- 3C 0 to 24 0.44 25 and up 0.40
AN 901- 4A 0 to 24 0.47 25 and up 0.35
AN 901- 4C 0 to 24 0.58 25 and up 0.54
AN 901- 5A 0 to 24 0.35 25 and up 0.20
AN 901- 6A 0 to 24 0.44 25 and up 0.38
AN 901- 8A 0 to 24 0.77 25 and up 0.75
AN 901-10A 0 to 24 0.29 25 and up 0.25
AN 901-12A 0 to 24 0.80 25 and up 0.76
AN 901-28A 0 to 24 0.85 25 and up 0.78
AN 901-29A 0 to 24 0.85 25 and up 0.78
AN 901-30A 0 to 24 1.75 25 and up 1.50
AN 901-31A 0 to 24 0.90 25 and up 0.86
AN 901-M 8 0.39
AN 901-M10 0.39
AN 901-M12C 1.42
AN 901-M14C 0.79

NAS 1598
STAT-O-SEAL
A stat-o-seal is a butyl o-ring molded into an aluminum washer. Handy for sealing fasteners and fittings when no o-ring grove is present. Dash number is the I.D. of the o-ring in 1/16ths.
Return to Top
NAS1598- 4 0 to 49 1.35 50 and up 1.25
NAS1598- 5 0 to 49 1.35 50 and up 1.30
NAS1598- 6 0 to 49 0.87 50 and up 0.85
NAS1598- 7 0 to 49 1.43 50 and up 1.40
NAS1598- 8 0 to 49 1.57 50 and up 1.53
NAS1598- 9 0 to 49 1.77 50 and up 1.70
NAS1598- 10 0 to 49 2.25 50 and up 2.15
NAS1598- 12 0 to 49 2.25 50 and up 2.15
NAS1598-14 0 to 49 2.25 50 and up 2.15

AN 904
TWO PIECE O-SEALS
Return to Top
AN 904- 4 0 to 9 1.70 10 and up 1.60
AN 904- 5 0 to 9 1.35 10 and up 1.30
AN 904- 6 0 to 9 1.35 10 and up 1.30
AN 904- 8 0 to 9 1.62 10 and up 1.54
AN 904-10 0 to 9 2.25 10 and up 2.20
AN 904-12 0 to 9 3.38 10 and up 3.30

AN 907
CONICAL SEAL
Seals damaged flare surfaces.
Return to Top
AN 907- 3 0 to 3 1.98 4 and up 1.88
AN 907- 4 0 to 3 2.14 4 and up 1.93
AN 907- 6 0 to 3 1.62 4 and up 1.57
AN 907- 8 0 to 3 1.88 4 and up 1.70
AN 907-10 0 to 3 2.34 4 and up 2.29
AN 907-12 0 to 3 2.88 4 and up 2.82

AN6290 / MS28788
PORT, O-RING
Return to Top
AN6290- 2 0 to 9 0.27 10 and up 0.25
AN6290- 3 0 to 9 0.31 10 and up 0.28
AN6290- 4 0 to 9 0.32 10 and up 0.30
AN6290- 5 0 to 9 0.45 10 and up 0.40
AN6290- 6 0 to 9 0.45 10 and up 0.40
AN6290- 8 0 to 9 0.45 10 and up 0.43
AN6290-10 0 to 9 0.28 10 and up 0.23
AN6290-12 0 to 9 0.67 10 and up 0.62
AN6290-16 0.68
AN6290-20 1.02

AN931
GROMMET
AN 931 uses the first dash number (A) as the size of the hole in 16ths of an inch. The second number (D) is the panel dimension in 16ths.
Example AN931-6-10 is Neoprene grommet, 3/8 I.D., 5/8 OD.
Return to Top
AN 931-02-04 0 to 19 0.27 20 and up 0.25
AN 931-02-09 0 to 19 0.30 20 and up 0.27
AN 931-02-16 0 to 19 0.75 20 and up 0.69
AN 931-03-05 0 to 19 0.32 20 and up 0.27
AN 931-03-10 0 to 19 0.38 20 and up 0.32
AN 931-04-07 0 to 19 0.45 20 and up 0.41
AN 931-03-09 0 to 19 0.34 20 and up 0.30
AN 931-03-10 0 to 19 0.38 20 and up 0.34
AN 931-04-12 0 to 19 0.56 20 and up 0.49
AN 931-04-16 0 to 19 0.76 20 and up 0.68
AN 931-05-09 0 to 19 0.50 20 and up 0.45
AN 931-05-12 0 to 19 0.36 20 and up 0.31
AN 931-05-13 0 to 19 0.42 20 and up 0.36
AN 931-06-10 0 to 19 0.44 20 and up 0.39
AN 931-06-16 0 to 19 0.47 20 and up 0.42
AN 931-07-11 0 to 19 0.46 20 and up 0.41
AN 931-08-13 0 to 19 0.46 20 and up 0.40
AN 931-08-20 0 to 19 0.92 20 and up 0.82
AN 931-09-13 0 to 19 0.50 20 and up 0.45
AN 931-10-14 0 to 19 0.59 20 and up 0.50
AN 931-10-20 0 to 19 0.82 20 and up 0.738
AN 931-11-16 0 to 19 0.94 20 and up 0.85
AN 931-12-17 0 to 19 0.70 20 and up 0.63
AN 931-12-20 0 to 19 0.85 20 and up 0.77
AN 931-12-23 0 to 19 1.16 20 and up 1.10
AN 931-12-26 0 to 19 1.15 20 and up 1.10
AN 931-14-20 0 to 19 1.11 20 and up 0.98
AN 931-14-26 0 to 19 1.25 20 and up 1.12
AN 931-16-22 0 to 19 1.25 20 and up 1.00
AN 931-16-30 0 to 19 1.60 20 and up 1.45

PLASTIC CAPS/PLUGSNAS 814 through NAS 816 plastic plugs and caps are used to seal hoses and ports during disassembly, storage or shipping, to keep fluids in and foreign objects out. Dash numbers indicate flare or port size. We stock all sizes from #3 (3/8"-24) to -12 (1 1/16"-12). Dash numbers 30 and 31 are BSP (British Standard Pipe)1/2 & 5/8 pipe sizes respectively, popular on English fluid systems.
Return to Top

NAS 814
FLARE CAP
Return to Top
NAS 814- 3 0 to 9 0.30 10 and up 0.20
NAS 814- 4 0 to 9 0.13 10 and up 0.10
NAS 814- 6 0 to 9 0.36 10 and up 0.30
NAS 814- 8 0 to 9 0.54 10 and up 0.45
NAS 814-10 0 to 9 0.40 10 and up 0.25
NAS 814-12 0 to 9 0.85 10 and up 0.60
NAS 814-30 0 to 9 0.68 10 and up 0.55
NAS 814-31 0 to 9 0.77 10 and up 0.55

NAS 815
FLARE OR PORT PLUG
Return to Top
NAS 815- 3 0 to 9 0.32 10 and up 0.20
NAS 815- 4 0 to 9 0.14 10 and up 0.10
NAS 815- 5 0 to 9 0.15 10 and up 0.10
NAS 815- 6 0 to 9 0.27 10 and up 0.15
NAS 815- 8 0 to 9 0.48 10 and up 0.30
NAS 815-10 0 to 9 0.62 10 and up 0.40
NAS 815-12 0 to 9 0.90 10 and up 0.60
NAS 815-30 0 to 9 0.65 10 and up 0.50
NAS 815-31 0