All Prices subject to change without notice. To contact us at Bon Aero, call us at (209) 754-5175, fax us at (209) 754-5177 or e-mail us at admin@davebean.com

LINKAGE, RIGGING AND CABLE HARDWARE

AN 21 to AN 29, Clevis Bolt; AN 42 to AN 47, Eye Bolts; AN 100 Cable Thimble; AN 111 Cable Bushing; AN 115 Cable Shackle; Turnbuckles: AN 155, Turnbuckle Barrel; AN 161 Turnbuckle Fork; AN 165 Turnbuckle Eye; AN 170, Turnbuckle Eye, Cable; Pins: AN 380 / MS24665 Cotter Pin; AN 381 / MS24665 Stainless Steel Cotter Pin; AN 386 Taper Pin; AN 392 to AN 397, Clevis Pin; AN 415 Cowling Lock Pin; AN 416 Safety Pin; AN 481 Clevis Fork Rod End, Welded; AN 486 Clevis Fork Rod End Threaded; AN 490 Threaded Rod End; AN 663 Double Shank Terminal, Ball End, Cable; AN 664 Single Shank Terminal; AN 665 Rod End Fork; AN 667 Cable Fork End; AN 668 Cable, Eye End; AN 219 / MS20219 Secondary Control Cable Pulley; AN 220 / MS 20220 Flight Control Pulley; MS21256 Clip; MS21259 Cable Stud End; MS21260 Turnbuckle End; AN 210 / MS 24566 Control Pulley, Anti-friction Bearing; MS51844 Nico Press Sleeve; NAS 1435-E Strap Eye; NAS 1435-K Strap Fork; M83420 Control Cable; NAS Phenolic Bronze Bushed Commercial Pulley.

AN 21 to AN 29
CLEVIS BOLT
Return to Top
Clevis bolt part numbers begin at AN- 2X-XX. The second number designates the shank diameter in 1/16ths. The dash number designates the length (L) in nominal 1/16ths. Grip length can be calculated by subtracting (A) from under head length (L). Nearly all clevis bolts are drilled for cotter pins. As with air frame bolts, an A suffix designates undrilled shank.

AN 21- 5 0 to 99 0.75 100 and up 0.68
AN 21-10 0 to 99 0.98 100 and up 0.88
AN 21-21 0 to 99 1.95 100 and up 1.76
AN 21-24 0 to 99 2.08 100 and up 1.87
AN 23- 8 0 to 99 0.90 100 and up 0.81
AN 23- 8A 0 to 99 0.36 100 and up 0.32
AN 23- 9 0 to 99 0.95 100 and up 0.86
AN 23- 9A 0 to 99 0.38 100 and up 0.34
AN 23-10 0 to 99 0.97 100 and up 0.88
AN 23-10A 0 to 99 0.40 100 and up 0.36
AN 23-11 0 to 99 1.10 100 and up 0.98
AN 23-11A 0 to 99 0.41 100 and up 0.37
AN 23-12 0 to 99 0.99 100 and up 0.89
AN 23-12A 0 to 99 0.43 100 and up 0.39
AN 23-13A 0 to 99 0.44 100 and up 0.40
AN 23-14 0 to 99 1.00 100 and up 0.90
AN 23-14A 0 to 99 0.44 100 and up 0.40
AN 23-15 0 to 99 1.00 100 and up 0.90
AN 23-15A 0 to 99 0.45 100 and up 0.41
AN 23-16 0 to 99 1.10 100 and up 1.00
AN 23-16A 0 to 99 0.74 100 and up 0.71
AN 23-17 0 to 99 1.01 100 and up 0.91
AN 23-17A 0 to 99 0.50 100 and up 0.45
AN 23-18A 0 to 99 0.52 100 and up 0.49
AN 23-19 0 to 99 1.02 100 and up 0.92
AN 23-19A 0 to 99 0.54 100 and up 0.50
AN 23-20 0 to 99 1.02 100 and up 0.92
AN 23-20A 0 to 99 0.54 100 and up 0.49
AN 23-21 0 to 99 1.03 100 and up 0.93
AN 23-21A 0 to 99 0.55 100 and up 0.50
AN 23-22 0 to 99 1.03 100 and up 0.93
AN 23-22A 0 to 99 0.56 100 and up 0.50
AN 23-23 0 to 99 1.04 100 and up 0.94
AN 23-24 0 to 99 1.05 100 and up 0.95
AN 23-26 0 to 99 1.07 100 and up 0.96
AN 23-28 0 to 99 1.04 100 and up 0.94
AN 23-30A 0 to 99 0.63 100 and up 0.57
AN 23-32 0 to 99 1.09 100 and up 0.98
AN 23-34 0 to 99 1.09 100 and up 0.98
AN 23-38 0 to 99 1.00 100 and up 0.90
AN 23-38A 0 to 99 0.76 100 and up 0.68
AN 23-40 0 to 99 0.80 100 and up 0.72
AN 23-42A 0 to 99 0.85 100 and up 0.77
AN 24- 8 0 to 49 0.90 50 and up 0.81
AN 24- 9 0 to 49 0.90 50 and up 0.81
AN 24- 9A 0 to 49 0.41 50 and up 0.37
AN 24-10A 0 to 49 0.43 50 and up 0.39
AN 24-11 0 to 49 0.93 50 and up 0.84
AN 24-12 0 to 49 0.98 50 and up 0.88
AN 24-13 0 to 49 0.97 50 and up 0.87
AN 24-13A 0 to 49 0.46 50 and up 0.41
AN 24-14 0 to 49 0.94 50 and up 0.89
AN 24-14A 0 to 49 0.47 50 and up 0.42
AN 24-15 0 to 49 0.95 50 and up 0.86
AN 24-15A 0 to 49 0.49 50 and up 0.44
AN 24-16 0 to 49 0.95 50 and up 0.86
AN 24-16A 0 to 49 0.49 50 and up 0.44
AN 24-17 0 to 49 0.96 50 and up 0.86
AN 24-17A 0 to 49 0.50 50 and up 0.45
AN 24-18 0 to 49 0.96 50 and up 0.86
AN 24-19 0 to 49 0.96 50 and up 0.86
AN 24-20 0 to 49 0.97 50 and up 0.87
AN 24-20A 0 to 49 0.60 50 and up 0.54
AN 24-21 0 to 49 0.98 50 and up 0.88
AN 24-22A 0 to 49 1.12 50 and up 1.01
AN 24-23 0 to 19 1.00 20 and up 0.90
AN 24-24 0 to 19 1.00 20 and up 0.90
AN 24-24A 0 to 19 0.70 20 and up 0.63
AN 24-25 0 to 19 1.02 20 and up 0.92
AN 24-26 0 to 19 1.02 20 and up 0.92
AN 24-27 0 to 19 1.05 20 and up 0.95
AN 24-28 0 to 19 1.07 20 and up 0.96
AN 24-28A 0 to 19 0.85 20 and up 0.77
AN 24-30 0 to 19 1.10 20 and up 0.99
AN 24-31 0 to 19 1.97 20 and up 1.75
AN 24-32 0 to 19 1.15 20 and up 1.04
AN 24-32A 0 to 19 0.92 20 and up 0.83
AN 24-36 0 to 19 1.22 20 and up 1.10
AN 24-36A 0 to 19 0.98 20 and up 0.88
AN 24-38A 0 to 19 1.00 20 and up 0.90
AN 24-40A 0 to 19 1.10 20 and up 0.99
AN 25- 9 0 to 19 1.10 20 and up 0.99
AN 25-14 0 to 19 1.20 20 and up 1.08
AN 25-19 0 to 19 1.35 20 and up 1.22
AN 25-20 0 to 19 1.35 20 and up 1.22
AN 25-21 0 to 19 1.35 20 and up 1.22
AN 25-23 0 to 19 1.40 20 and up 1.26
AN 25-24 0 to 19 1.40 20 and up 1.26
AN 25-25 0 to 19 1.40 20 and up 1.26
AN 25-26 0 to 19 1.45 20 and up 1.31
AN 25-28 0 to 19 1.65 20 and up 1.49
AN 25-30 0 to 19 2.10 20 and up 1.89
AN 25-38 0 to 19 2.60 20 and up 2.34
AN 26-12 0 to 19 1.15 20 and up 1.04
AN 26-13 0 to 19 1.15 20 and up 1.04
AN 26-14 0 to 19 1.30 20 and up 1.17
AN 26-16 0 to 19 1.32 20 and up 1.19
AN 26-17 0 to 19 2.35 20 and up 2.20
AN 26-19 0 to 19 1.36 20 and up 1.22
AN 26-20 0 to 19 1.40 20 and up 1.26
AN 26-22 0 to 19 1.55 20 and up 1.40
AN 26-26 0 to 19 1.70 20 and up 1.53
AN 26-27 0 to 19 1.75 20 and up 1.58
AN 26-28 0 to 19 1.87 20 and up 1.68
AN 26-29 0 to 19 1.90 20 and up 1.71
AN 26-30 0 to 19 3.80 20 and up 3.50
AN 26-30A 0 to 19 3.00 20 and up 2.70
AN 26-31 0 to 19 2.00 20 and up 1.80
AN 26-31A 0 to 19 3.00 20 and up 2.70
AN 27-11 0 to 19 1.85 20 and up 1.67
AN 27-14 0 to 19 1.95 20 and up 1.76
AN 27-17 0 to 19 2.10 20 and up 1.89
AN 27-21 0 to 19 2.85 20 and up 2.57
AN 27-23 0 to 19 3.10 20 and up 2.79
AN 27-32 0 to 19 3.50 20 and up 3.15
AN 27-50 0 to 19 4.80 20 and up 4.32
AN 28-12 0 to 19 3.50 20 and up 3.15
AN 28-27 0 to 19 4.25 20 and up 3.83
AN 28-34 0 to 19 5.10 20 and up 4.59
AN 28-46 0 to 19 8.10 20 and up 7.29
AN 29-64 0 to 19 10.05 20 and up 9.05

AN 42 to AN 47
EYE BOLT
Return to Top
Eye bolts, AN - 4X-XX. Starting with 42 for #10-32 thru 48 for ½-20. Length dash numbers are in nominal 1/8ths like air frame bolts. Also, shank drilling is designated by deleting the A suffix.

AN 42B- 3 0 to 99 4.05 100 and up 3.65
AN 42B- 3A 0 to 99 3.80 100 and up 3.42
AN 42B- 4 0 to 99 4.15 100 and up 3.74
AN 42B- 4A 0 to 99 4.85 100 and up 4.25
AN 42B- 7 0 to 99 4.25 100 and up 3.83
AN 42B- 7A 0 to 99 4.00 100 and up 3.60
AN 42B-12A 0 to 99 4.17 100 and up 3.75
AN 42B-13 0 to 99 4.64 100 and up 4.18
AN 42B-13A 0 to 99 4.17 100 and up 3.75
AN 42B-14 0 to 99 4.60 100 and up 4.14
AN 42B-14A 0 to 99 4.20 100 and up 4.00
AN 42B-17 0 to 99 4.55 100 and up 4.10
AN 42B-17A 0 to 99 4.50 100 and up 4.05
AN 42B-21A 0 to 99 4.80 100 and up 4.20
AN 42B-22A 0 to 99 4.90 100 and up 4.41
AN 42B-23A 0 to 99 4.95 100 and up 4.46
AN 42B-24A 0 to 99 5.10 100 and up 4.59
AN 42B-25A 0 to 99 5.49 100 and up 4.94
AN 43B- 5 0 to 99 3.95 100 and up 3.56
AN 43B- 5A 0 to 99 3.47 100 and up 3.12
AN 43B- 6A 0 to 99 3.95 100 and up 3.56
AN 43B- 7 0 to 99 4.20 100 and up 3.78
AN 43B- 7A 0 to 99 4.20 100 and up 3.78
AN 43B-10 0 to 99 5.47 100 and up 4.92
AN 43B-10A 0 to 99 4.15 100 and up 3.74
AN 43B-11 0 to 99 4.50 100 and up 4.05
AN 43B-11A 0 to 99 4.20 100 and up 3.78
AN 43B-12 0 to 99 5.55 100 and up 5.00
AN 43B-12A 0 to 99 4.35 100 and up 3.92
AN 43B-13A 0 to 99 4.45 100 and up 4.01
AN 43B-14 0 to 99 5.60 100 and up 5.00
AN 43B-14A 0 to 99 4.55 100 and up 4.10
AN 43B-15A 0 to 99 4.65 100 and up 4.19
AN 43B-16A 0 to 99 4.85 100 and up 4.37
AN 43B-17A 0 to 99 5.25 100 and up 4.73
AN 43B-20 0 to 99 5.75 100 and up 5.18
AN 43B-23A 0 to 49 8.68 100 and up 8.25
AN 43B-25 0 to 99 5.85 100 and up 5.27
AN 43B-25A 0 to 99 6.55 100 and up 6.40
AN 43B-26A 0 to 99 5.80 100 and up 5.22
AN 44- 4A 0 to 99 4.00 100 and up 3.60
AN 44- 7A 0 to 99 4.50 100 and up 4.05
AN 44-12 0 to 99 5.85 100 and up 5.27
AN 44-12A 0 to 99 4.20 100 and up 3.78
AN 44-14A 0 to 99 4.40 100 and up 3.96
AN 44-16A 0 to 99 5.49 100 and up 4.94
AN 44-20 0 to 99 6.30 100 and up 5.67
AN 44-20A 0 to 99 5.15 100 and up 4.64
AN 44-21A 0 to 99 5.50 100 and up 4.95
AN 44-24A 0 to 99 6.50 100 and up 5.85
AN 45- 6A 0 to 99 4.95 100 and up 4.46
AN 45- 7 0 to 99 5.10 100 and up 4.59
AN 45- 7A 0 to 99 5.10 100 and up 4.59
AN 45-12 0 to 99 7.40 100 and up 6.66
AN 45-12A 0 to 99 6.94 100 and up 6.25
AN 45-22A 0 to 99 7.35 100 and up 6.62
AN 46-22 0 to 99 10.50 100 and up 9.45
AN 46-25A 0 to 99 8.40 100 and up 7.56
AN 46-30 0 to 99 9.50 100 and up 8.55
AN 47- 7 0 to 99 12.60 100 and up 11.34
AN 47-27 0 to 99 12.90 100 and up 11.61
AN 47-30 0 to 99 13.50 100 and up 12.15
AN 47-32 0 to 99 13.70 100 and up 12.33
AN 47-35 0 to 99 13.90 100 and up 12.51

AN392 - AN 397 CLEVIS PIN

Return to Top
Clevis pin diameter is indicated by the final digit in the main number (number of 1/16ths of an inch).The dash number
indicates grip length in nominal 32nds of an inch. Note that this number is always odd. This is to give a slight amount of clearance over the nominal 1/16ths thickness clevis or shackle.
AN 392- 7 0 to 99 0.15 100 and up 0.14
AN 392- 9 0 to 99 0.17 100 and up 0.15
AN 392-11 0 to 99 0.24 100 and up 0.22
AN 392-13 0 to 99 0.23 100 and up 0.21
AN 392-19 0 to 99 0.26 100 and up 0.23
AN 392-21 0 to 99 0.27 100 and up 0.25
AN 392-23 0 to 99 0.28 100 and up 0.25
AN 392-25 0 to 99 0.28 100 and up 0.25
AN 392-27 0 to 99 0.29 100 and up 0.26
AN 392-29 0 to 99 0.30 100 and up 0.27
AN 392-31 0 to 99 0.30 100 and up 0.27
AN 392-33 0 to 99 0.30 100 and up 0.27
AN 392-35 0 to 99 0.30 100 and up 0.27
AN 392-37 0 to 99 0.30 100 and up 0.27
AN 392-39 0 to 99 0.42 100 and up 0.38
AN 392-41 0 to 99 0.43 100 and up 0.39
AN 392-43 0 to 99 0.45 100 and up 0.41
AN 392-47 0 to 99 0.46 100 and up 0.41
AN 392-53 0 to 99 0.50 100 and up 0.45
AN 392-57 0 to 99 0.90 100 and up 0.81
AN 393- 7 0 to 99 0.17 100 and up 0.15
AN 393- 9 0 to 99 0.22 100 and up 0.19
AN 393-11 0 to 99 0.24 100 and up 0.20
AN 393-13 0 to 99 0.23 100 and up 0.21
AN 393-15 0 to 99 0.25 100 and up 0.23
AN 393-17 0 to 99 0.29 100 and up 0.25
AN 393-19 0 to 99 0.30 100 and up 0.27
AN 393-21 0 to 99 0.35 100 and up 0.33
AN 393-23 0 to 99 0.36 100 and up 0.324
AN 393-27 0 to 99 0.39 100 and up 0.35
AN 393-29 0 to 99 0.44 100 and up 0.40
AN 393-31 0 to 99 0.45 100 and up 0.41
AN 393-33 0 to 99 0.46 100 and up 0.41
AN 393-37 0 to 99 0.51 100 and up 0.46
AN 393-39 0 to 99 0.53 100 and up 0.48
AN 393-41 0 to 99 0.55 100 and up 0.50
AN 393-43 0 to 99 0.58 100 and up 0.52
AN 393-49 0 to 99 0.63 100 and up 0.57
AN 393-51 0 to 99 0.65 100 and up 0.59
AN 393-55 0 to 99 0.70 100 and up 0.63
AN 393-61 0 to 99 0.84 100 and up 0.76
AN 393-63 0 to 99 0.87 100 and up 0.78
AN 393-65 0 to 99 0.89 100 and up 0.80
AN 393-71 0 to 99 0.89 100 and up 0.80
AN 394- 11 0 to 99 0.23 100 and up 0.21
AN 394- 13 0 to 99 0.24 100 and up 0.22
AN 394- 15 0 to 99 0.25 100 and up 0.23
AN 394- 17 0 to 99 0.30 100 and up 0.27
AN 394- 19 0 to 99 0.33 100 and up 0.30
AN 394- 21 0 to 99 0.37 100 and up 0.34
AN 394- 25 0 to 99 0.39 100 and up 0.35
AN 394- 27 0 to 99 0.41 100 and up 0.37
AN 394- 29 0 to 99 0.43 100 and up 0.39
AN 394- 33 0 to 99 0.47 100 and up 0.42
AN 394- 37 0 to 99 0.53 100 and up 0.48
AN 394- 41 0 to 99 0.56 100 and up 0.50
AN 394- 45 0 to 99 0.60 100 and up 0.54
AN 394- 47 0 to 99 0.62 100 and up 0.56
AN 394- 49 0 to 99 0.64 100 and up 0.58
AN 394- 51 0 to 99 0.66 100 and up 0.59
AN 394- 53 0 to 99 0.68 100 and up 0.61
AN 394- 55 0 to 99 0.71 100 and up 0.64
AN 394- 57 0 to 99 0.73 100 and up 0.66
AN 394- 59 0 to 99 0.75 100 and up 0.68
AN 394- 61 0 to 99 0.77 100 and up 0.69
AN 394- 63 0 to 99 0.77 100 and up 0.69
AN 394- 65 0 to 99 0.78 100 and up 0.70
AN 394- 71 0 to 99 0.90 100 and up 0.81
AN 394- 73 0 to 99 0.90 100 and up 0.81
AN 394- 75 0 to 99 0.92 100 and up 0.83
AN 394- 81 0 to 99 0.95 100 and up 0.86
AN 394- 83 0 to 99 0.97 100 and up 0.87
AN 394- 87 0 to 99 0.99 100 and up 0.89
AN 394- 95 0 to 99 1.05 100 and up 0.95
AN 394-107 0 to 99 1.15 100 and up 1.04
AN 395-11 0 to 99 0.46 100 and up 0.41
AN 395-17 0 to 99 0.50 100 and up 0.45
AN 395-19 0 to 99 0.51 100 and up 0.46
AN 395-21 0 to 99 0.54 100 and up 0.49
AN 395-25 0 to 99 0.59 100 and up 0.53
AN 395-29 0 to 99 0.64 100 and up 0.58
AN 395-41 0 to 99 0.65 100 and up 0.59
AN 395-65 0 to 99 0.70 100 and up 0.63
AN 395-73 0 to 99 1.50 100 and up 1.35
AN 395-97 0 to 99 4.80 100 and up 4.32
AN 396-15 0 to 99 0.56 100 and up 0.50
AN 396-17 0 to 99 0.63 100 and up 0.57
AN 396-19 0 to 99 0.87 100 and up 0.78
AN 396-21 0 to 99 0.88 100 and up 0.79
AN 396-23 0 to 99 0.89 100 and up 0.80
AN 396-25 0 to 99 0.93 100 and up 0.84
AN 396-33 0 to 99 0.95 100 and up 0.86
AN 396-63 0 to 99 1.60 100 and up 1.44
AN 397-23 0 to 99 1.32 100 and up 1.19

AN 415
COWLING LOCK PIN
Return to Top
AN 415- 2 0 to 99 0.21 100 and up 0.19

AN 416
SAFETY PIN
Return to Top
AN 416- 1 0.44
AN 416- 2 0.43

Pins

AN 380 / MS24665
COTTER PIN (100 pk) (PLATED)
Return to Top
AN 380-1- 4 0 to 9 1.20 10 and up 1.08
AN 380-1.5-2 0 to 9 1.39 10 and up 1.25
AN 380-2- 1 0 to 9 1.20 10 and up 1.08
AN 380-2- 2 0 to 9 1.35 10 and up 1.20
AN 380-2- 3 0 to 9 1.50 10 and up 1.30
AN 380-2- 4 0 to 9 3.00 10 and up 2.70
AN 380-2- 6 0 to 9 1.65 10 and up 1.50
AN 380-2- 8 0 to 9 2.10 10 and up 1.89
AN 380-2.5-2 0 to 9 9.93 10 and up 9.42
AN 380-2.5-3 0 to 9 2.10 10 and up 1.89
AN 380-3- 2 0 to 9 1.30 10 and up 1.17
AN 380-3- 3 0 to 9 1.20 10 and up 1.08
AN 380-3- 4 0 to 9 1.35 10 and up 1.22
AN 380-3- 5 0 to 9 1.40 10 and up 1.26
AN 380-3- 6 0 to 9 1.60 10 and up 1.44
AN 380-3- 8 0 to 9 1.85 10 and up 1.67
AN 380-3- 9 0 to 9 2.01 10 and up 1.81
AN 380-3-12 0 to 9 2.60 10 and up 2.50
AN 380-4- 3 0 to 9 2.00 10 and up 1.80
AN 380-4- 4 0 to 9 2.25 10 and up 2.03
AN 380-4- 5 0 to 9 2.86 10 and up 2.57
AN 380-4- 6 0 to 9 2.98 10 and up 2.61
AN 380-4- 7 0 to 9 3.10 10 and up 2.79
AN 380-4- 8 0 to 9 3.25 10 and up 2.93
AN 380-4- 9 0 to 9 3.00 10 and up 2.70
AN 380-4-10 0 to 9 3.50 10 and up 3.15
AN 380-5- 8 0 to 9 3.50 10 and up 3.15

AN 381 / MS24665
COTTER PIN (100 pk)
(STAINLESS STEEL)
Return to Top
AN 381-1- 6 0 to 9 1.50 10 and up 1.35
AN 381-2- 8 0 to 9 1.30 10 and up 1.17
AN 381-2-12 0 to 9 1.70 10 and up 1.53
AN 381-2-16 0 to 9 2.10 10 and up 1.80
AN 381-2-32 0 to 9 5.20 10 and up 4.68
AN 381-3-20 0 to 9 6.25 10 and up 5.63
AN 381-3-32 0 to 9 7.10 10 and up 6.39
AN 381-4-20 0 to 9 5.85 10 and up 5.27
AN 381-4-32 0 to 9 8.50 10 and up 7.65
AN 381-4-48 0 to 9 11.95 10 and up 10.76
AN 381-5-16 0 to 9 9.62 10 and up 8.66
AN 381-5-32 0 to 9 9.62 10 and up 8.66

AN 386
TAPER PIN
Return to Top
First dash number (A) indicates root diameter of the taper reamer diameter (smallest diameter of hole)
-2 = 1/4 (.225" root diameter)
-3 = 5/16 (.317" root diameter)
-4 = 3/8 (.355" root diameter)
Second dash number (B) is grip length (shank length less 1/8") in 1/8ths of an inch.
AN 386-2- 6 2.98
AN 386-2-14 5.40
AN 386-3-16 8.50

AN 481 (MS27976)
CLEVIS FORK ROD END, WELD
Return to Top

(P suffix indicates cad plate (MS27976-_#))
AN 481- 1P 0 to 99 14.00 100 and up 12.60
AN 481- 2P 0 to 99 9.95 100 and up 8.96
AN 481- 4P 0 to 99 10.00 100 and up 9.00

AN 486 (MS27975-_#)
CLEVIS FORK ROD END, THREADED
Return to Top

AN 486- 1 0 to 99 11.00 100 and up 9.90
AN 486- 2 0 to 99 11.10 100 and up 9.99
AN 486- 3 0 to 99 11.10 100 and up 9.99

AN 490
THREADED ROD END
Return to Top
AN 490HT 5P 0 to 99 4.65 100 and up 4.19
AN 490HT 6P 0 to 99 5.28 100 and up 4.75
AN 490HT 8P 0 to 99 5.32 100 and up 4.79
AN 490HT10P 0 to 99 5.40 100 and up 4.86
AN 490HT11P 0 to 99 6.60 100 and up 5.94
AN 490HT15P 0 to 99 5.45 100 and up 4.91

AN 665
ROD END FORK

Return to Top
AN 665-10L 18.35
AN 665-10R 18.35
AN 665-21L 14.80
AN 665-21R 14.80
AN 665-34L 23.25
AN 665-34R 23.25
AN 665-46L 28.10
AN 665-61L 39.95
AN 665-61R 39.95
AN 665-80L 44.30

AN 663
DOUBLE SHANK TERMINAL, BALL END CABLE
Return to Top
Completely interchangeable with MS20663
AN 663C 2 0.4954
AN 663C 3 0.63
AN 663C 4 0.75

AN 664
SINGLE SHANK TERMINAL
Return to Top
Completely interchangeable with MS20664.
AN 664C 2 0.37
AN 664C 3 0.44
AN 664C 4 0.69
AN 664C 5 1.20

MS51844
NICO PRESS SLEEVE
Return to Top
MS51844-22 0 to 99 0.12 100 and up 0.10
MS51844-23 0 to 99 0.22 100 and up 0.20
MS51844-24 0 to 99 0.24 100 and up 0.21
MS51844-42 0 to 99 0.16 100 and up 0.14
MS51844-43 0 to 99 0.22 100 and up 0.19
MS51844-44 0 to 99 0.22 100 and up 0.21
MS51844-45 0 to 99 0.33 100 and up 0.31
MS51844-46 0 to 99 0.46 100 and up 0.43

AN 100
CABLE THIMBLE
Return to Top

AN 100- 3 0 to 99 0.12 100 and up 0.115
AN 100- 4 0 to 99 0.15 100 and up 0.15
AN 100- 5 0 to 99 0.17 100 and up 0.15
AN 100- 6 0 to 99 0.18 100 and up 0.17

AN 111
CABLE BUSHING
Return to Top

AN 111- 3 0 to 99 2.50 100 and up 2.25
AN 111- 4 0 to 99 4.00 100 and up 3.60
AN 111- 5 0 to 99 4.20 100 and up 3.78
AN 111- 8 0 to 99 6.30 100 and up 5.67

AN 115
CABLE SHACKLE
Return to Top

AN 115- 8 0 to 99 9.50 100 and up 8.55
AN 115-21 0 to 99 9.40 100 and up 8.46
AN 115-32 0 to 99 15.80 100 and up 14.22

NAS 1435-E
STRAP EYE

Return to Top
NAS1435-E2 0 to 19 2.24 20 and up 1.98
NAS1435-E3 0 to 19 2.89 20 and up 2.49
NAS1435-E4 0 to 19 3.54 20 and up 3.16

NAS 1435-K
STRAP FORK

Return to Top
NAS1435-K2 0 to 19 1.97 20 and up 1.80
NAS1435-K3 0 to 19 2.59 20 and up 2.27
NAS1435-K4 0 to 19 3.35 20 and up 2.98

TURNBUCKLES
Clip-locking Turnbuckles utilize two locking clips instead of lock-wire for safetying. The turnbuckle barrel and terminals are slotted lengthwise to accommodate the locking clips. After the proper cable tension is reached, the barrel slots are aligned with the terminal slots and the clips are inserted. The curved ends of the locking clips expand and latch in the vertical slot in the center of the barrel.

AN 155
TURNBUCKLE BARREL
Return to Top

AN 155- 8S 0 to 99 5.10 100 and up 4.59
AN 155-16L 0 to 99 5.25 100 and up 4.73
AN 155-16S 0 to 99 6.50 100 and up 5.40
AN 155-32L 0 to 99 5.40 100 and up 4.86
AN 155-32S 0 to 99 5.25 100 and up 4.73

AN 161
TURNBUCKLE FORK
Return to Top

AN 161- 8LS 0 to 99 6.00 100 and up 5.40
AN 161- 8RS 0 to 99 6.00 100 and up 5.40
AN 161-16RL 0 to 99 7.10 100 and up 6.39
AN 161-16RS 0 to 99 5.85 100 and up 5.27
AN 161-22LL 0 to 99 8.85 100 and up 7.97
AN 161-22LS 0 to 99 7.85 100 and up 7.07
AN 161-22RL 0 to 99 8.85 100 and up 7.97
AN 161-22RS 0 to 99 7.85 100 and up 7.07
AN 161-32LL 0 to 99 8.25 100 and up 7.43
AN 161-32LS 0 to 99 8.85 100 and up 7.97
AN 161-32RL 0 to 99 8.25 100 and up 7.43
AN 161-32RS 0 to 99 7.50 100 and up 6.75
AN 161-46RS 0 to 99 16.60 100 and up 14.94

AN 165
TURNBUCKLE EYE
Return to Top

AN 165- 8LS 0 to 99 5.75 100 and up 5.18
AN 165-16LL 0 to 99 6.80 100 and up 6.12
AN 165-16LS 0 to 99 5.70 100 and up 5.13
AN 165-16RL 0 to 99 6.80 100 and up 6.12
AN 165-16RS 0 to 99 5.70 100 and up 5.13
AN 165-22LS 0 to 99 7.15 100 and up 6.44
AN 165-22RS 0 to 99 7.15 100 and up 6.44
AN 165-32LS 0 to 99 8.70 100 and up 7.83
AN 165-32RS 0 to 99 8.70 100 and up 7.83

AN 170
TURNBUCKLE EYE, CABLE
Return to Top

AN 170- 8LS 0 to 99 6.55 100 and up 5.90
AN 170- 8RS 0 to 99 6.55 100 and up 5.90
AN 170-16LL 0 to 99 7.05 100 and up 6.35
AN 170-16LS 0 to 99 7.00 100 and up 6.30
AN 170-16RL 0 to 99 7.05 100 and up 6.35
AN 170-16RS 0 to 99 7.00 100 and up 6.30
AN 170-22LS 0 to 99 7.16 100 and up 6.44
AN 170-22RS 0 to 99 7.16 100 and up 6.44
AN 170-32LS 0 to 99 8.60 100 and up 7.74
AN 170-32RS 0 to 99 8.60 100 and up 7.74

AN 667
CABLE FORK END
Return to Top
Completely interchangeable with MS20667.
AN 667- 2 5.60
AN 667- 3 5.60
AN 667- 4 7.95
AN 667- 5 9.95
AN 667- 6 17.60

AN 668
CABLE EYE END
Return to Top
Completely interchangeable with MS20668.
AN 668- 2 4.16
AN 668- 3 4.95
AN 668- 5 6.48

MS21256
TURNBUCKLE CLIP
Return to Top
Made of corrosion resistant steel wire.
MS21256-2 0 to 99 .042 100 and up 0.35

MS21259
CABLE STUD END
Return to Top
MS21259-2L 0 to 99 4.66 100 and up 4.20
MS21259-2R 0 to 99 4.66 100 and up 4.20
MS21259-3L 0 to 99 4.74 100 and up 4.27
MS21259-3R 0 to 99 4.74 100 and up 4.27
MS21259-4L 0 to 99 5.70 100 and up 5.13
MS21259-4R 0 to 99 5.70 100 and up 5.13
MS21259-6R 0 to 99 7.60 100 and up 6.84

MS21260
TURNBUCKLE END
Return to Top
MS21260-L2LH 0 to 99 4.64 100 and up 4.18
MS21260-L2RH 0 to 99 4.64 100 and up 4.18
MS21260-L3LH 0 to 99 4.78 100 and up 4.30
MS21260-L3RH 0 to 99 4.78 100 and up 4.30
MS21260-L4LH 0 to 99 5.42 100 and up 4.88
MS21260-L4RH 0 to 99 4.64 100 and up 4.18
MS21260-S2LH 0 to 99 3.85 100 and up 3.47
MS21260-S2RH 0 to 99 3.85 100 and up 3.47
MS21260-S3LH 0 to 99 4.78 100 and up 4.30
MS21260-S3RH 0 to 99 4.78 100 and up 4.30
MS21260-S4LH 0 to 99 4.86 100 and up 4.38
MS21260-S4RH 0 to 99 4.86 100 and up 4.38
MS21260-S5LH 0 to 99 6.25 100 and up 5.63
MS21260-S5RH 0 to 99 6.75 100 and up 6.08

AN219 / MS20219
SECONDARY CONTROL PULLEY
Return to Top

MS20219-2 0 to 9 8.50 10 and up 7.50
MS20219-4 0 to 9 19.98 10 and up 18.00

AN 220 / MS20220
FLIGHT CONTROL PULLEY
Return to Top

MS20220- 1 16.20
MS20220- 2 12.00
MS20220- 4 15.50

AN 210 / MS24566
CONTROL PULLEY, ANTI FRICTION BEARING
Return to Top

MS24566-1B 9.10
MS24566-2B 9.95
MS24566-3B 19.97
MS24566-4B 10.75

M83420
CONTROL CABLE
Return to Top

M83420-2C 0 to 99 0.27 100 and up 0.22
M83420-3 0 to 99 0.24 100 and up 0.20
M83420-4 0 to 99 0.52 100 and up 0.48

Return to Top